Parker’s Duck Boat Finish is a high quality, durable flat finish for use on duck boats, skiffs and canoes.  Parker’s Duck Boat Finish is designed to provide excellent water resistance and weathering.  Parker’s Duck Boat Finish dries quickly to a non-reflective dull finish that resists scratching and burnishing and applies easily to any surface by brush, roller or spray.  Parker’s Duck Boat Finish comes in your choice of three natural colors.
 
FINISH:  Flat   
SUGGESTED DFT:  2-4 mils   
VOLUME SOLIDS:  46% 
FLASH POINT:  104° F. (40°)
THEORETICAL COVERAGE:  738 square feet per gallon per dry mil
DRYING TIME:  To touch:  4-8 hours at 75° F., 50% R.H.,
                                Re-coat:  12-24 hours @ 75° F., 50% R.H.
RECOMMENDED THINNER:  Paint thinner or mineral spirits
SURFACE PREPARATION:  All surfaces should be clean, dry and free of all dirt, grease, oil, loose paint, rust and other foreign material. Glossy surfaces should be sanded or de-glossed.
MAX. SERV. TEMPERATURE:  200° F. (93° C.)
RESISTANCE:  Water – Very Good (not for constant immersion service)
                              Wearing – Very Good
COMPATIBILITY: Self-priming on wood.  Prime aluminum, steel or fiberglass with a universal primer (300 Primer).
APPLICATION:  Apply brush, roller or spray.
                                 Airless or HVLP spray:  
                                 Airless:  Use a fluid tip with .015” to .017” orifice is suggested at 2500 psi.                                   HVLP:  Use .051” fluid nozzle, #10 Air Cap.
COLOR:  Bay Gray, Hunters Green, Marsh Grass